Comprehensive inner lining structure of submerged arc furnace hearth
The right half is the blast furnace bottom and the distribution of thermocouples embedded in the hearth, which is part of the new furnace diagnostic system.
The right half is the blast furnace bottom and the distribution of thermocouples embedded in the hearth, which is part of the new furnace diagnostic system.
The size of the electrode diameter is determined by the current density allowed by the current passing through the electrode cross-sectional area. If the diameter is small, the allowable current density is large
It can be processed into rectangles, squares, oval shapes and other shapes according to user needs. Weight of lumpy product.
The calcined anthracite is fed by an electromagnetic vibrating feeder, and is fed into a double-layer horizontal vibrating screen and a single-layer horizontal vibrating screen via a belt conveyor and a bucket elevator.
The reason that affects the cracking of electrode paste in the production of submerged electric furnace is and the solution.
Reduce the control height of the paste column from 4-4.5 meters to 3.5-4 meters for control. The installation of electrode paste follows the principle of adding less and more frequently.
The height of the electrode paste refers to the height from the upper end of the electrode clip to the top of the electrode paste. If the electrode paste is too high, the coarse and fine particles in the electrode paste are prone to stratification
The so-called oven is an operation in which the furnace lining and electrodes are gradually adapted to the feeding and smelting by heating, and its main purpose is to dry the furnace lining and roast the electrode paste.
It has several characteristic
. The electrode paste has high ash content, and the bonding strength of the electrode paste is poor. Where the ash content is concentrated, the bonding force is worse.