Although the main components of natural microcrystalline graphite and anthracite are carbon elements, there are great differences in crystal structure and physicochemical properties. It can be comprehensively identified by sensory method
cold ramming paste
Before filling, the electrode paste shall be broken into 80 ~ 100mm small pieces, so that the electrode paste can pass between the two ribs smoothly.
In order to obtain good products and control the performance of products, regular carbon production enterprises with scale must first break and screen the calcined carbon raw materials
the electrode paste occupies a very important position in the above ore thermoelectric furnace, so it is called the “heart” of this kind of electric furnace.
The electrode paste has a relatively small resistance coefficient and can reduce the loss of electric energy.
This paper introduces how to improve the production process of common electrode paste and make special treatment on raw materials to produce excellent electrode paste with high strength, good thermal shock resistance, good sintering performance, low unit consumption and power saving
The electrode paste height refers to the height from the upper end of the electrode clamp to the top of the electrode paste. If the electrode paste is too high
The electrode paste is also called self baking electrode. It relies on the heat in the submerged arc furnace to complete the baking
The A-phase electrode of 3 # calcium carbide furnace in the calcium carbide workshop had a soft break and paste leakage accident.