The right half is the blast furnace bottom and the distribution of thermocouples embedded in the hearth, which is part of the new furnace diagnostic system.
submerged arc furnace
e contact surface between the end of the electrode and the coke layer at the bottom of the furnace. If it is a new electrode, the steel plate at the bottom of the head should be thicker.
The size of the electrode diameter is determined by the current density allowed by the current passing through the electrode cross-sectional area. If the diameter is small, the allowable current density is large
In production practice, depending on the specific circumstances, there may be many factors. Everyone is welcome to communicate.
It can be processed into rectangles, squares, oval shapes and other shapes according to user needs. Weight of lumpy product.
(1) The measurement should be made twice in each shift, once during the shift, and once during the shift, and make a record.
After the electrode below the copper tile of the submerged electric furnace enters the smelting process, the temperature of the electrode will rise further due to the further increase in the temperature of the raw material
The use of high-strength electrode paste was tested in a 20MVA submerged arc furnace. The results show that it can effectively prevent electrode accidents and play a key role in improving the economic indicators of smelting.
The height of the electrode paste refers to the height from the upper end of the electrode clip to the top of the electrode paste.
The use process and consumption of the electrode paste In terms of the characteristics of use, the electrode paste is a continuous self-baking electrode. During use, the outer layer is a cylinder made of a 1-2mm thick steel plate.